COMMON FEATURES OF DORLET CONTROLLERS
4 DEVICES IN ONE
One DORLET controller has included:
-INTERCOM / VIDEO INTERCOM*
*in selected models
NETWORK ADAPTOR INCLUDED
There is no need to add an extra adaptor to your controller. Just select the right model, TCP-IP or RS-485 and the network adaptor will be integrated on the controller’s board. The connection with each controller is monitorized constantly and in case of disrumption it will be notified.
POWER ADAPTOR INCLUDED
All controllers comes with its own power adaptor that provides power supply to the controller, readers, electric strikes and alarm sensors. For other devices please consult consumption. Monitorization of the electric parameters of the power adaptor (220v power failure, output power failure, etc...)
BOX CASING INCLUDED
All controllers comes inside a box unless it is ordered in a diferent casing for other uses. This box is made to contain the controller, the power adaptor, and UPS battery in one unique place unreachable by general public and protected against undesired manipulation by the box’s tamper. This tamper sensor trigers an alarm in case the box is opened.
To avoid power cuts to the service, all controllers are ready to work with a UPS battery that is contained inside the controller’s box. The charge level and other parameters of this battery are monitored by the controller and in case of any problem it will be shown on the software (low voltage level, batery failure, etc...).
Inputs and outputs integrated directly on the controller`s board and fully integrated withing the hardware and software. Extensions are available.
Inputs are suppervised inputs, for security purposes, that allows to monitor the state of the sensors (shortcircuit, open circuit, etc...) avoiding to have a sensor incorrectly installed and protect them against intentional manipulations.
Outputs are free voltage relays that can be used for general purposes, automatic actuations or control over third party devices.
Each DORLET’s controller has its own CPU that process al data information.This allows the controller/s to still work locally in case of network failure witout depending on a server or any other procesing unit.
All data for the operation of the controller is store locally and synchronized online with the server instead of quering the server each time the controller needs information. This allows the controller to process the information faster and decrease the network trafic.
In case of network failure all information needed for the operation is stored in the controller so it can still work. Once the network is restored the information generation during the cut will be upload to the server.
All controllers have a litium battery welded on the board that retain the information stored on the controller’s RAM memory for at least 2 months when there is no power form the public grid or the UPS battery.
DORLET’s controllers are ready to work whit many diferent reading technologies using standard protocols Wiegand, Clock and Data, RS-232, etc...